Hi-Fi

Designed like the highly acclaimed Oval 12 but using 14 gauge wire. Clear Oval uses the patented hollow oval woven design in which every conductor is as close to the return current as every other wire. Rated for in-wall use.

THis cable sounds rich and warm.

Learn More

Indigo: Eliminates parasitic vibrations, and providing greater sound clarity and focus. The Indigo’s are ideal for amplifiers, DAC’s, CD Players, Speakers and Turntables. Made of machined stainless steel, the Indigo’s have a low-profile design to minimize any increase in height.

Each Indigo will hold up to 16lbs (7.2kg) and have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.

Learn More

The Soundcare SuperSpike is an all new-design, all-in-one spike foot. The unique construction of the SuperSpike eliminates the most common problem experienced when using a conventional spike: damaged surfaces, while offerings the benefits of isolating the equipment from external vibrations in the environment.

 The self adhesive version has many uses. Use this version under speakers that do not have threaded inserts or do not have threadsizes that are offered by Soundcare. Having them in a tripod arrangement allows for a stable footing even in situations of slightly uneven floors. This version is also fantastic under electronic components such as amplifiers, CD players, etc. Try them under subwoofers as well. Triangular positioning of the feet allows for optimal sonic benefit and is even more cost effective as only three spikes are required per component.

Learn More

Because Subwoofers create big sine curves and lots of vibrations, they do well with an extra bit of isolation. These SoundPath isolation feet help to absorb those vibrations and keep the resonanting frequencies where you'd like them instead in your floor.

Learn More

These are the same as the classic Koss Porta Pro Headphones just with an inline microphone and volume control for added convenience.

Learn More

A good quality optical cable that's particularly useful for audio applications but can be used just as easily on surround sound systems as well. 

It's available in toslink to toslink ends or toslink to 3.5mm. Please call for specific availability on lengths and terminations.

Learn More

The C-digital has been developed to let you hear just how good some of the more affordable digital to analogue converters can be. The Tuned ARAY conductor configuration was developed to improve the performance of digital cables and is an easy-to hear-upgrade. The ARAY design of C-digital will begin to give you an idea of what your system can really do.

Please call for stock of specific lengths.

Learn More

This is an easy, budget-friendly way of making sure your records sit flat on your Turntable platter.

Perfect for those not-so-perfect 2nd hand records you picked up super cheap or maybe some older records that have seen better days.

Even on good condition records, the puck will help your needle track better giving you a better sound overall.

It'll work well on pretty much any Turntable that doesn't have a threaded spindle.

Learn More

LW-6N is the 6N lead wire made of Ultra High Purity Copper wire, the configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The tight winding against each other makes the clear transmission of music signals. The end of wire is fastened by gold plated terminal. Learn More

“A big improvement over standard USB cables, great performance over lengths of up to 5 metres.” When it comes to new products The Chord Company works on a simple principle:..

Please call for stock and availability of specific lengths

Learn More

This is a rich and warm sounding speaker cable. A very good quality HiFi speaker cable but it was designed as an installation grade cable. Therefore it is super flexible and able to get around tight corners where a lot of other HiFi speaker cable cannot.

This makes it extremely popular and versatile choice.

I had this cable on my home system with Rega amps and PMC twenty5.21s and it brought out the richness in tone of that system. 

Learn More

These come in two versions. A single damping device $129 or a triple layer version with a piece of specially chosen timber wedged in between a pair of damping devices $329. Designed to sit below an Isotek or equivalent power board. It is designed to absorb micro vibrations and give your system a lower noise flaw. Hear it for yourself. More information coming soon. Learn More

Genuine Ortofon 2m Red replacement stylus. Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78.

Learn More

For copper instead of tin and better insulating properties than the Chord C-Sub cable, the Clearway is a big step up from the Chord C-Sub. 

Learn More

A good place to start your journey into the world of XLR or Balanced cables. Balanced cables have  

Learn More

Available in 0.75m, 1.5m, 3m, 5m, 10m & 20m lengths this ethernet cable is perfect for your audio requirements.

Please call for availability of specific lengths.

Learn More

There's no need to suffer the indignity of a broken or scuffed up dust cover on your Rega turntable! Simply replace the dust cover with a new one!

This will fit current Planar 1, 2, 3 and 6 models as well as all old model (rectangular-shaped) Rega Turntables.

 

Learn More

Bordeaux: Eliminates parasitic vibrations, and providing greater sound clarity and focus. The Bordeauxs are ideal for heavier components including monoblocks, Speakers, Power Conditioners, and Turntables. Made of machined stainless steel, the Bordeauxs have a low-profile design to minimize any increase in height.

Each Bordeaux will hold up to 32lbs (14.5kg) and have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.

Learn More

New and improved 3D squared  isolation discs have arrived from Les Davies better Finish promising  higher performance. One feet only required to be used under each support.

To be used in all components of an audio system with special attention to reducing electrical current induced vibration in electrical components.

Learn More