Vinyl Accesories

vinyl accessories

Turntables are the most tweakable bit of hifi kit. There is no shortage of things you can do to improve the performance of your deck, from isolation to gripping the disc better. Here’s some of the things that don’t fit neatly into one of the other categories.

Items 1 to 20 of 26 total

per page

Page:
  1. 1
  2. 2
  • HiFi Guru 2mm Spacer

    For many Rega Tonearms and Turntables, when we put a non Rega cartridge on them we need to lift up the Tonearm vertically ever so slightly to create just the perfect Vertical Tracking Angle (VTA) for your new cartridge.

    On some other tonearm and turntables designs you can do this VTA adjustment with a little knob on the side of the tonearm, with Regas we need to physically prop the tonearm up just a bit so the angle is just right for your new cartridge. 

    Rega make their own spacer to do this prop up but it's a fiddly affair requiring us to take off the tonearm, insert the spacer and reinsert the whole tonearm. The HiFi Guru is much simpler. We can slide the two halves under the tonearm and Voila!

    Learn More
  • Van Den Hul "A Tribute to Analog- A Sound Connection" Demo LP Record

    This one of a kind very special LP is a reference quality analogue recording, made as a tribute to analogue. Excellently suited to demonstrate top level phono cartridges & Hifi System' qualities, the life material was recorded with Mr. Hans Dulfer, one of the most famous Dutch saxophone players, Lils Mackintosh, a well-known solo singer on many festivals and last but not least: The Beets Brothers.

    Learn More

    Regular Price: $55.00

    Special Price $49.50

    Call for stock


    Contact Us

  • Tonar Dust Jockey - Carbon Fibre and Velvet Combo

    With Carbon Fibre anti static bristles on the outside of a Velvet inner, this brush combines the best of both worlds for a superior clean.

    The Carbon Fibre acts to push dust and particles into the Velvet interior that is much better at picking it all up.

    Learn More
    $50.00

  • Van Den Hul The Headshell Link Set

    The HEADSHELL LINK SET is a high quality four lead wire set for the cartridge-to-headshell connection.

    • Four color coded leads (red, blue, green and white) made of our MCS – 300 solid core Matched Crystal Silver wire.
    • Each lead is fitted with our heavy 24 carat gold plated Connecting Clips: The CC-1.0 with Ø 1.0 mm for the tone arm side and the CC-1.2 with Ø1.2 mm for the cartridge side.
    • The total length per lead, including the Connecting Clips, is 5.4 cm. The wire length is 4.3 cm.

    Total length per lead including clips is 5.4 cm; Wire length is 4.3 cm.

    Learn More

    Regular Price: $79.00

    Special Price $70.00

    Call for stock

  • Pro-Ject Q Up Automatic Tonearm Lifter

    The Q Up is a precision device that safely lifts your tonearm at the end of the record. It can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and modernised to work with either classic or contemporary turntable / tonearm combinations.

    The Q Up can be configured for a variety of tonearm heights, thicknesses and shapes. It only interacts with the tonearm at the end of record and does not adversely affect the tonal quality of your system. No need to worry about falling asleep with your record playing or forgetting it's playing if you get distracted.

    Learn More

    Regular Price: $79.00

    Special Price $71.00

  • Rega REFERENCE EBLT Drive Belt

    This is the new top spec drive belt from Rega. These reduce WOW or flutter in the rotation of the platter because they are made to an exacting standard with no impurities whatsoever.

    These belts now come as standard with the Planar 8 and Planar 10 but are highly recommended with the Planar 3 and Planar 6 especially if you have the Neo TT PSU.

    It can be a nice upgrade, however, for any Rega Turntable.

    Learn More
    $75.00

  • Pro-Ject Record Puck

    This is an easy, budget-friendly way of making sure your records sit flat on your Turntable platter.

    Perfect for those not-so-perfect 2nd hand records you picked up super cheap or maybe some older records that have seen better days.

    Even on good condition records, the puck will help your needle track better giving you a better sound overall.

    It'll work well on pretty much any Turntable that doesn't have a threaded spindle.

    Learn More
  • Ortofon Hi-Fi Headshell Cables LW 6N

    LW-6N is the 6N lead wire made of Ultra High Purity Copper wire, the configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The tight winding against each other makes the clear transmission of music signals. The end of wire is fastened by gold plated terminal. Learn More
    $109.00

    Available to Special Order


    Contact Us

  • Rega Clear Turntable Lid

    There's no need to suffer the indignity of a broken or scuffed up dust cover on your Rega turntable! Simply replace the dust cover with a new one!

    This will fit current Planar 1, 2, 3 and 6 models as well as all old model (rectangular-shaped) Rega Turntables.

     

    Learn More
    $129.00

    Available in Store


    Contact Us

  • Ortofon Hi-Fi Headshell Cables LW 7N

    LW-7N is the hybrid lead wire made of Ultra High Purity Copper wire of 7N and 6 N. The end of wire is fastened by Rhodium plated terminal.
    As there is no foreign particle other than Copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise.

    Learn More
    $149.00

    Available to Special Order


    Contact Us

  • UberLight Flex (Black)

    This is a must-have accessory for anyone with a decent cartridge or anyone who doesn't have 20/20 vision...! Perfect for a gift for any vinyl loving relative or friend!

    We're all about protecting vulnerable cartridges from their owners!

    It sits neatly on the side of your HiFi rack and is completely run by LEDs. 

    You can even toggle through the different lighting mood temperatures...got a date, switch it to the warm glow setting.

    Great value too and an elegant solution for a Turntable.

    Learn More
    $149.00

  • Rega Smoked Turntable Lid

    As used on the current model Planar 6 turntable but can just as easily be put onto any other Rega Turntable except the current Planar 8 and Planar 10. Learn More
  • Project Clamp It Aluminium Record Clamp

    Functional and easy to use sound improvement!  

    Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback. Therefore surfaces of record and platter should connect tigthly.  

     

    Standard record pucks, that use weight to achieve this, have 2 disadvantages:  

    1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings  

    2) Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite: Vinyl will get shaped like a bowl with no contact of the outer edges of the record to the platter.  

    Both will affect the sound negatively.  

     

    Clamp it is the real solution, an accessory with a clamp mechanism around the center spindle, that will not add weight, which would induce rumble. You can fine-adjust pressure according condition of your warped records. Fitting of Clamp it is easily done within seconds. This accessory will not only please your ears, its beautifully machined diamond-cut edges will also look extremely cool on any turntable!  

    Learn More
    $169.00

    Call for stock


    Contact Us

  • Ortofon Hi-Fi LH-4000 Headshell

    The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

    Special features:

    • Azimuth adjustable, which is beneficial for optimal channel separation
    • Ergonomic fingerlift for easy handling

    Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please find Ortofon headshells dimensions chart here.

    Learn More
    $169.00

    Available to Special Order


    Contact Us

  • Rega Tungsten Counterweight upgrade

    Made From Tungsten, much smaller diameter than standard Rega counterweights improves the soundstage. 

    Learn More
    $170.00

    Call for stock


    Contact Us

  • Michell Engineering Record Clamp Standard & Rega Version

    A quality, great value record clamp.

    Record clamps improve the sound of your records by stabilising the LP and improving tracking. Better Balance, definition & soundstage are the sorts of improvements you're likely to hear.

    Learn More
  • Knosti Disco Antistat Record Cleaning System

    Developed in Germany in 1978, the Knosti Disco-Antistat has simplified the procedure and made the task less of a grind. It has become one of the world’s most popular record cleaning tools, due to its efficiency, ease of operation and affordable price. Its success is also due to the fact that it bridges the gap between the very cheap but mainly ineffective ‘cloth and fluid’ group of record cleaners and the full-blown esoteric and expensive vacuum machines like those made by American company VPI. 

    The Knosti Disco Antistat has been on the market unchanged since 1978! That alone is testimony to its effectiveness. It removes the dirt and dries the record without leaving any residues. It also minimises static electricity which is a big problem affecting record performance. If you are into or back into vinyl, then you need, yes need one

    Learn More
    $229.00

  • Acoustic Signature Load

    A high quality, perfectly machined record weight made by German manufacturer, Acoustic Signature.

    This will squish down the waviest of records improving their sound quality.

    At a mere 280g, it won't put pressure on the bearing. 

    The extra weight and dampening qualities of the Load S do, however, go further to support cartridge tracking and the overall performance improvement of your turntable.

    Acoustic Signature weights and clamps are designed to be used with a range of different turntables not only Acoustic Signature models.

    Learn More
    $250.00

  • Van Den Hul MCS 150 Pure Silver Internal Tonearm Wire....... 1.0m set of 4 (Green, Blue, White & Red)

    This is a set of 4 x 48cm. 7 lacquer-insulated very flexible silver wires per cable. Insulation melts in the process of soldering. Unique three-dimensional resolution and sound-stage depth!

    The transparent and directly solderable coating is available in 4 colours: white, blue, red and green.

    The external diameter is 250 micron.
    The insulation acts as a flux during the soldering.
    The maximum mechanical tension the MCS - 150 M can handle is 36 gram. The maximum temperature handling is 180 °C (= 356 °F).
    Typical application of the MCS - 150 M is tone-arm wire of the finest quality.
    Twisting 4 lengths of The MCS - 150 M together (with clockwise conductor wiring +-+- = starquad) will produce one of the finest interconnects you can think of.
    Also as internal wiring in pre and power amplifiers, the MCS - 150 M is the best choice.
    The sound character is extremely smooth with a lot of very fine detail. Typically a non metallic sound.
    Available in any specified length starting from 1 metre.
    Packing: Depending on ordered length or weight.

     

     

    Learn More

    Regular Price: $280.00

    Special Price $250.00

    Available in Store

  • Ortofon Hi-Fi LH-8000 Headshell

    The LH-8000 is a high quality handmade wood-based headshell with a polished brass finger lift. The highly attractive LH-8000 is perfect for a variety of cartridges, e.g. MC JubileeMC WindfeldMC Windfeld TiMC AnnaMC Century2M Bronze and 2M Black.

    Learn More
    $279.00

    Available in Store

Items 1 to 20 of 26 total

per page

Page:
  1. 1
  2. 2