SVS SB-4000 - Sealed Box Home Subwoofer (Piano Gloss Black)

Frequency Response / Acoustic Data: 19-310Hz ± 3 dB Roll-off slope specifically optimised to take maximum advantage of available room gain 2-meter ground plane away from reflective structures (quasi-anechoic).

Subwoofer Specs: Premium Black Ash and Piano Gloss Black finish options

Protective non-resonant steel mesh grille

Front-firing 13.5" driver Rear-mounted amplifier

Screw-in rubber feet Robust Medium Density Fiberboard(MDF) cabinet construction

Cabinet Dimensions (without grille): 18.3” (465mm) H X 17.8” (453mm) W X 18.6” (471.3mm) D

Cabinet Dimensions (with grille): 18.3” (465mm) H X 17.8” (453mm) W X 20.9” (530mm) D Shipped Dimensions: 23.5” (598mm) H X 23.5” (598mm) W X 28” (712mm) D

Weight (unboxed): 102.3 lbs. (46.4 kg)

Shipped Weight: 117.8lbs (53.45kg)

Driver Specs: High-performance SVS 4000 Series

Subwoofer Driver - optimized for sealed cabinet design.

Proprietary 13.5” Driver with finely tuned Overhung Motor Configuration

43lb (19.5kg) pound Woofer with 37.7lb (17.1kg) pounds for the motor

Overhung 52mm Xmax, 76.2mm Xmech precision aligned excursion

8-layer aluminum flat wire edge wound 3” voice coil for ultra-low distortion, efficient heat dissipation, exceptional linearity and nearly zero power compression.

Two massive, dedicated toroidal ferrite magnets generate unparalleled levels of magnetic force to drive the highest levels of excursion, SPL, and start/go power for the deepest and most authoritative bass possible.

All-new High density FEA-optimized cast aluminum basket provides unequaled levels of rigidity, tensile strength, and energy transference available from a subwoofer.

Dual 24-strand copper and Nomex composite high-temperature leads woven through the suspension provide a pristine electrical connection from the amplifier to the voice coil.

Premium glass fiber laminated dustcap and reinforced and vented paper-composite cone sub-structure ensure a light, ridged, and neutral radiating surface.

Precision machined motor elements and narrow tolerance suspension parts produce unmatched linearity at full excursion for exceptionally tight and fast output, even at reference volumes.

Extreme oversized low carbon vented steel U-yoke and top plate provide superior cooling and improved magnetics for maximum performance and efficiency.

Copper ring shorting sleeve reduces gap induction and distortion, enhances thermal conductivity

Nickle-plated high-tension spring terminals

Proprietary injection molded gasket and parabolic SBR extreme-excursion surround maintains ideal pistonic motion for pinpoint accuracy and control

Low carbon 1008 steel components with black electrophoresis plating

Amplifier Specs: Massively powerful Sledge 1,200-watt continuous Class D design with 4,000+ watts of Peak Power.

Unmatched intelligence from user adjustable low pass, phase, polarity and room gain compensation with three parametric EQs and port tuning (Ported models only) for absolute best alignment with speakers and optimized performance in any room.

Groundbreaking SVS Bluetooth DSP control app for iOS and Android devices with three user presets allow custom tuning for every room and system.

High efficiency cool-running Class D switching topology with massive 32 Amp 600 Volt MOSFET’s result in lower EMI and highest efficiency while providing effortless power to produce SPLs and low frequency output with pristine clarity well beyond reference listening levels.

High resolution 50Mhz Analog Devices Audio DSP with double precision 56bit filtering is most advanced subwoofer processor available for perfect audio reproduction.

100v-240v full range input active Power Factor Correction (PFC) pre-regulates mains to solid 360V DC regardless of mains voltage or quality so the sound quality never falters no matter what’s coming out of the wall Active PFC lowers average current and smooths mains input current allowing for 1200W output from a standard 15A mains circuit.

XLR and RCA stereo input/output with ultra-wide input voltage for consumer and professional audio applications.

Convenient front-mounted display featuring new Intelligent Feature Control (IFC) with bright blue dimmable/defeatable 8-digit LED front display.

Custom EQ and DSP limiter settings tuned specifically for the SB-4000 sealed cabinet design.

Auto/On and 3-30V AC/DC trigger for Maximum Installation Convenience.

Input impedance 22kohm (unbalanced RCA)/ 22kohm (balanced XLR).

Green 0.5-watt low standby power consumption RoHS compliant, lead-free construction, world-wide safety certifications

We offer free shipping to metropolitan areas on all orders over $100, except for orders containing the following products:

Televisions, Floorstanding speakers, Subwoofers and Package systems.

Shipping on these items will be standard delivery. If you want expedited shipping, an option should be available at checkout.

We try to dispatch all goods within 48 hours however from time to time the stock in store runs out before we have a chance to update the website. In these cases we will contact you if the item will take longer than 48 hours to be dispatched.

We strongly suggest that items are shipped to a business address, or an address where someone can sign for the delivery. On checkout you have the option of choosing Authoirty to Leave. This will not require a signature, but goods will be left at your premise and the delivery company will take no responsibility for them beyond this point.

Delivery times can vary depending on location. Regional areas may take more than 5 business days depending on the courier used.