You have no items in your shopping cart.
Vinyl Accesories
Turntables are the most tweakable bit of hifi kit. There is no shortage of things you can do to improve the performance of your deck, from isolation to gripping the disc better. Here’s some of the things that don’t fit neatly into one of the other categories.
-
Rega REFERENCE EBLT Drive Belt
This is the new top spec drive belt from Rega. These reduce WOW or flutter in the rotation of the platter because they are made to an exacting standard with no impurities whatsoever.
These belts now come as standard with the Planar 8 and Planar 10 but are highly recommended with the Planar 3 and Planar 6 especially if you have the Neo TT PSU.
It can be a nice upgrade, however, for any Rega Turntable.
Learn More$75.00 -
Pro-Ject Q Up Automatic Tonearm Lifter
The Q Up is a precision device that safely lifts your tonearm at the end of the record. It can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and modernised to work with either classic or contemporary turntable / tonearm combinations.
The Q Up can be configured for a variety of tonearm heights, thicknesses and shapes. It only interacts with the tonearm at the end of record and does not adversely affect the tonal quality of your system. No need to worry about falling asleep with your record playing or forgetting it's playing if you get distracted.
Learn MoreRegular Price: $79.00
Special Price $71.00
-
Van Den Hul The Headshell Link Set
The HEADSHELL LINK SET is a high quality four lead wire set for the cartridge-to-headshell connection.
- Four color coded leads (red, blue, green and white) made of our MCS – 300 solid core Matched Crystal Silver wire.
- Each lead is fitted with our heavy 24 carat gold plated Connecting Clips: The CC-1.0 with Ø 1.0 mm for the tone arm side and the CC-1.2 with Ø1.2 mm for the cartridge side.
- The total length per lead, including the Connecting Clips, is 5.4 cm. The wire length is 4.3 cm.
Learn MoreTotal length per lead including clips is 5.4 cm; Wire length is 4.3 cm.
-
Tonar Dust Jockey - Carbon Fibre and Velvet Combo
With Carbon Fibre anti static bristles on the outside of a Velvet inner, this brush combines the best of both worlds for a superior clean.
The Carbon Fibre acts to push dust and particles into the Velvet interior that is much better at picking it all up.
Learn More$50.00 -
Van Den Hul "A Tribute to Analog- A Sound Connection" Demo LP Record
This one of a kind very special LP is a reference quality analogue recording, made as a tribute to analogue. Excellently suited to demonstrate top level phono cartridges & Hifi System' qualities, the life material was recorded with Mr. Hans Dulfer, one of the most famous Dutch saxophone players, Lils Mackintosh, a well-known solo singer on many festivals and last but not least: The Beets Brothers.
Learn More -
HiFi Guru 2mm Spacer
For many Rega Tonearms and Turntables, when we put a non Rega cartridge on them we need to lift up the Tonearm vertically ever so slightly to create just the perfect Vertical Tracking Angle (VTA) for your new cartridge.
On some other tonearm and turntables designs you can do this VTA adjustment with a little knob on the side of the tonearm, with Regas we need to physically prop the tonearm up just a bit so the angle is just right for your new cartridge.
Rega make their own spacer to do this prop up but it's a fiddly affair requiring us to take off the tonearm, insert the spacer and reinsert the whole tonearm. The HiFi Guru is much simpler. We can slide the two halves under the tonearm and Voila!
Learn More
