Cable Accessories
-
Chord Ohmic Soldered Speaker Plugs (Individual)
Silver-plated speaker plugs that fit any speaker cable as an instant upgrade to your hi-fi system and using technology developed for the flagship ChordMusic and Sarum T cables. Learn More -
Krix Solderless Banana Plugs (4 Pack)
Krix banana plugs are ideal to use with your existing speaker cable. Learn MoreRegular Price: $45.00
Special Price $40.00
-
Chord Ohmic Spade Plugs (Screw Type) Priced Individually
What about tarnish?
It’s a common mistake to think that because silver oxidises it is a poor conductor. The reality is that silver does not oxidise until it reaches 170 C. It does, however, tarnish at room temperature, reacting with sulphur in the air.
Although tarnished silver is not the nicest thing to look at (on ornaments or cutlery), electrically, it is less troublesome.Tarnish (normally silver sulphide) is a soft and malleable material and can be easily moved aside with very little force. We ensure these forces are present in our speaker plugs and spade connectors. The diagram below illustrates the fact that no matter how smooth a contact looks to the naked eye, it is still quite rough at a microscopic level. There are limited points of actual contact, even under fairly high levels of force. By simply moving a connector in and out of the socket, it is possible to effectively clean the contact points. Ensure all equipment is switched off before doing this simple maintenance procedure.
Plugs will also benefit from a major clean, using a good contact cleaner or enhancer.
-
Van Den Hul The Thames RCA 1m
Twin lead with Hybrid 7 strand per lead version of our The ISIS twin lead coaxial cable. with a very high flexibility and an extra steel-wire ground-lead / strain relief in its centre. With durable dark red HULLIFLEX®(*) outer jacket. Can be used as an upgrade on existing turntable wiring or as a high quality pair of RCA's. Comes with gold plated C - 4.0 (RCA) connectors.
Learn More -
SVS SoundPath Wireless Audio Adapter
Many Subwoofer companies now offer a wireless system to connect amplifier with a subwoofer. It helps to solve many problems with subwoofer placement and cable management.
Learn More -
Van Den Hul The Isis 1m RCA (Inc earth for grounding of a turntable)
The ISIS is a twin line RCA to RCA coaxial interconnect, especially designed to provide superior signal transfer quality between your high-end turntable and pre-amplifier at a very affordable price.
Where high-end turntables often are supplied with meagre interconnects, significant improvements in sound quality, resolution and imaging can be achieved by upgrading to The Isis.
The Isis can also be used as a high quality pair of RCA's.
Twin lead 19 strands per lead coaxial cable with a high flexibility and a steel-wire ground-lead / strain relief in its centre. With durable
bright red HULLIFLEX®(*) outer jacket. Comes with gold plated C - 4.0 (RCA) connectors.Please call us to make sure we have the length you require in stock.
Learn More -
Nordost Norse 2 Bi-Wire Jumpers (4 Pack)
After paying so much time and attention to the integrity of your sound system, why degrade its performance by neglecting the last few inches of crucial cabling. Nordost’s Norse 2 Bi-Wire Jumpers are the perfect solution for achieving exceptional sound by replacing the standard, bent metal plates and generic wires supplied with most bi-wire loudspeakers.
The Norse 2 jumper uses a silver-plated, solid core OFC conductor which is wrapped in a precise spiral of Micro Mono-Filament before being covered in an outer layer of FEP insulation and cut at a specific, mechanically tuned length. This dedicated design provides a straight-line, low-loss jumper that ensures optimum results. The difference that a well-engineered jumper makes in sound quality is astonishing, and these improvements are magnified that much more when maintaining the same core cable technology throughout.
Learn More$309.00 -
Van Den Hul D-501 Hybrid RCA Cable
The D - 501 HYBRID is sonically one of the best cables in Van den Hul's range. Not really expensive and with a very high performance quality. The 2 signal lines are made each of 19 x 0.1 mm very high grade OFC wires with the highest density of very pure silver coating and a centre steel wire to provide extra mechanical reinforcement and strain relief which can also be used as a ground wire for a turntable.
Please call us to make sure the length you require is in stock.
Learn More -
Chord Signature Ohmic Links
About twenty years ago, Bi-wiring speakers was all the rage. That's where you run one set of speaker cable to the high frequency input on your speakers and a separate set to the low frequency input. In this process you do away with the high to low frequency metal jumpers on the back of the speaker.
Normally the jumper links that come with a set of speakers are bits of metal and not made to perform well sonically. The positive effects of Bi-wiring were 90% the effect of getting rid of those crappy jumper links.
These days when a client comes in asking about Bi-wiring, we make sure they first try some good quality jumper links.
Like a good quality speaker cable these will define the image, you'll hear more of the tail-end of the notes - the ringing of the piano strings dying slowly away into silence...
Learn More -
Chord Sarum T Speaker Links X4
Sarum T speaker links are more that just the final link for a system full of Sarum T cables. They are an easy way of getting the last ounce of performance from any high resolution speaker system, regardless of the speaker cable you’re using.
The links feature Taylon® insulation are fitted with our ChordAlloy™ plated ChordOhmic banana plugs and spade connectors.
Learn More